Your Lamona washing machine is a sophisticated appliance that can do a lot of heavy lifting for you. But like any machine, it can malfunction. Your Lamona washing machine may display an error code if it encounters a problem. These error codes can help you diagnose the problem and troubleshoot it yourself. So, whether you’re a seasoned Lamona owner or you’re just getting started, read on for everything you need to know about Lamona washing machine error codes.
Here are some of the common Lamona washing machine error codes:
- E01: NTC Error
- E02: Heater open circuit error
- E03: Heater continuously active error
- E04: Heat valve short circuit.
- E05: Drain pump issue. It’s either clogged or the pump motor will not rotate.
- E07: Water level sensor reading error.
- E10: Door lock error. The door lock has short circuited.
- E11: Motor phase open circuit error
- E13: Motor communication cable open circuit error.
- E17: Programme finished without spinning due to too much foam.
- E29: Operating voltage out of limit error
If you see any of these error codes on your Lamona washing machine, you can try the following troubleshooting steps:
- Check the water supply and drainage hoses to make sure they are not blocked or kinked.
- Clean the lint trap and check the outlet dry air temperature sensor.
- Reset the washing machine by turning it off and then back on.
- If the error code persists, contact a qualified technician for further assistance.
Your Lamona washing machine will need to be serviced by trained and qualified professionals, as such by us here at Capital Repairs. We are washing machine appliance experts visit our washing machines page for more information.
We operate across all London boroughs and home counties including East London, Essex, Hertfordshire, North London, North West London, South East London, South London, South West London, Surrey, and West London. Our repair services include all household appliances including washing machines, tumble dryers, electric cookers, gas cookers, fridge freezers, microwaves and vacuums. Get in touch with us at Capital Repairs by calling us on 02084 293727 or sending us a message via our Contact Us page.